Emergency Conversion Kits

An emergency lighting kit is a module fitted inside or next to a normal LED luminaire that powers it from a battery for a set time when the mains fails. Existing lighting is thus converted to emergency lighting without installing separate emergency luminaires.

Products

Emergency kit models

The kits run the luminaire on battery for up to 3 hours during a power cut. The choice depends on the luminaire's LED voltage and power.

ModelSuitable luminaireMaximum load
YFB-1212 V DC constant voltage100 W
YFB-2424 V DC constant voltage100 W
YFB-803–200 V DC constant current80 W
YFB-2003–200 V DC constant current200 W
YFB-220 AC220 V AC LED luminaire200 W
YFK-603–200 V DC constant current, compact60 W

How to choose the right kit

  • Supply type: Choose YFB-12 or YFB-24 for LED strip and constant-voltage luminaires, and YFB-80, YFB-200 or YFK-60 for constant-current drivers.
  • Space: The 28.5 × 22 × 145 mm YFK-60 fits narrow luminaire housings.
  • Duration: The 1-hour or 3-hour target is set by the project and specification.
  • Maintenance: For periodic tests, see the emergency lighting maintenance guide.

Related guides

  • How Should Emergency Lighting Be Maintained? Standards and Practical Guide

    Emergency lighting systems must be tested regularly under TS EN 1838 and the Turkish Regulation on the Fire Protection of Buildings, and the results entered in the logbook: a short functional test, a monthly test of 3–5 minutes and an annual full-discharge test that measures the battery's real capacity. Luminaires must switch on within a few seconds of a mains failure and operate for at least 1 hour; 3 hours are chosen where the regulation or project specification requires it.

Frequently Asked Questions

Which luminaires can an emergency kit be fitted to?

The output power and voltage range of the kit must match the LED load of the luminaire. Choose the model according to the LED voltage of the luminaire and the required emergency duration; if in doubt, ask our technical team.

How long does a luminaire stay lit with an emergency kit?

Duration depends on the battery capacity of the kit and the power it delivers in emergency mode. At least 1 hour is targeted for evacuation, and 3 hours where the regulation or specification requires it.

When should the battery of an emergency kit be replaced?

A battery that cannot complete the required duration in the annual full-discharge test should be replaced. Battery life depends on its chemistry; LiFePO4 batteries last longer than NiCd and NiMH batteries.