Our Solution Policies

We assess each project on its own conditions and choose luminaires from the needs of the space, not from the catalogue.

• Target illuminance (lux), glare (UGR) and uniformity are set according to the standard.
• Luminaire quantity and layout are verified with DIALux/Relux calculations.
• Unnecessary wattage and surplus luminaires are removed from the project.

The value in the quotation and the value of the luminaire working on site should be the same.

• Wattage, luminous flux, CRI, colour temperature and lifetime are written in each product's datasheet.
• Values are given with a ±10% measurement tolerance; exact values for a project are shared with the quotation.
• Luminaires are burn-in tested before shipment.

If a standard size does not fit the project, we adapt the luminaire to the project.

• Linear luminaires are made to the required length and in L, Y, S, hexagonal, triangular and ring shapes.
• Wattage, colour temperature, beam angle, housing colour and control system are chosen for the project.
• A prototype can be prepared before production of custom luminaires.

Over time, the operating cost of lighting matters more than the investment cost.

• lm/W efficacy is compared when selecting products.
• Control options such as dimming, daylight and occupancy sensors are recommended where needed.
• Annual savings and payback period are calculated for LED retrofits.

We remain your contact after delivery.

• Mounting details and wiring diagrams are shared with the installer.
• Technical support is provided for commissioning and tasks such as DALI addressing.
• Replacement and repair are handled for products under warranty.