Design Your Magnetic Track Lighting
Enter the room size, choose the track type and layout, and place Lyra magnetic luminaires on the track. The tool splits the track into stock lengths, adds corners and connectors and sizes the driver; you see the design as a plan and in 3D. When you are ready, request a quote with the bill of materials.
1. System and layout
Track type
Mounting
Layout
2. Room and track dimensions
Selected run
Select a run on the plan.
3. Luminaires
Luminaires are added to the selected run (—). Drag a luminaire on the plan to slide it along the track.
Lyra Drop10 W · Ø50 × 135,5 mm0
Lyra Fold 66 W · 134 × 22 × 106 mm0
Lyra Fold 1212 W · 220 × 22 × 106 mm0
Lyra Grid 66 W · 134 × 22 × 43 mm0
Lyra Grid 1212 W · 220 × 22 × 43 mm0
Lyra Grid 1818 W · 328 × 22 × 43 mm0
Lyra Line 3010 W · 305 × 22 × 43 mm0
Lyra Line 6020 W · 605 × 22 × 43 mm0
Lyra Line 9030 W · 905 × 22 × 43 mm0
Lyra Line 12040 W · 1205 × 22 × 43 mm0
Lyra Spot 1010 W · Ø45 × 100 mm0
Lyra Spot 2020 W · Ø60 × 135 mm0
Lyra Zoom10 W · Ø45 × 100 mm0
4. Driver and control
Recommended driver for the total load + 20%: —. The in-track driver sits inside the track; no separate box needed.
5. Room and project
Rooms
6. Request a quote
Design summary
- Total track
- 10 m
- Luminaires
- 0
- Total power
- 0 W
- Driver
- —
Bill of materials
| Item | Code | Qty |
|---|---|---|
| Surface-mounted magnetic track 3 m | 20 01 IC RA 042 3M | 2 |
| Surface-mounted magnetic track 2 m | 20 01 IC RA 042 2M | 2 |
| Surface-mounted L corner | 20 01 IC RA 051 | 4 |
| Flexible connector (on/off) | 20 01 IC RA 048 ON | 4 |
| Power feed (on/off) | 20 01 IC RA 046 ON | 1 |
- Tracks are cut from stock lengths (1, 2, 3 m).
- This is a preliminary design; luminaires, drivers and suspension quantities are checked by our team when quoting.
How does the tool calculate?
- Tracks are planned from 1, 2 and 3 m stock lengths with as few joints as possible; straight joints use straight connectors.
- Every 90° turn gets an L corner with a flexible connector inside to carry power.
- Each run has one power feed; the driver is chosen as 50, 100, 200 or 300 W from the total luminaire power plus 20%.
- If the surface track is suspended, suspension kits are estimated at about one every 1.5 m per side.
System products
Technical data for tracks, connectors and drivers is on the 48 V magnetic track and accessories page; luminaires are in the magnetic track luminaires category. For a project-specific layout we also prepare a lighting design.
Frequently asked questions
What is a magnetic track?
A magnetic track is a slim aluminium track running on 48 V DC. Luminaires hold on to it with magnets; they are fitted and removed without tools and slide along the track.
What is the difference between surface, spring-clip recessed and trimless track?
Surface track is mounted on the ceiling or suspended. Spring-clip recessed track is held by springs in a slot cut into finished plasterboard and leaves a slim 8 mm trim. Trimless track is installed before the plaster skim and leaves a frameless line in the ceiling.
How is the driver sized?
The power of the luminaires on a run is added up, 20% is added and the smallest driver covering that value is chosen. A run above 300 W is fed by more than one driver.
Is the design final?
No, it is a preliminary design. The bill of materials is checked by our team when quoting; mounting, power feed and suspension points are confirmed on site.
How do I send my design?
Fill in your details in the quote section and send it by e-mail, or send the bill of materials as a WhatsApp message. You can also save the plan and 3D view as PNG.